2019年四川长宁6.0级地震序列时空演化特征及其地震构造环境研究     

宫悦  王宇玺  梁明剑  龙锋  赵敏 《地震》2020,40(4):90-102

地震序列类型能够直观地反映构造应力场环境、 地震构造及孕震环境介质的差异性。 主—余型地震多发生在相对均匀的介质环境, 而前—主—余型地震及震群型地震往往发生在复杂的构造环境。 2019年6月17日四川省宜宾市长宁县发生的6.0级地震余震活动总体呈NW向分布, 其南东段的余震呈相对单一的NW向条带状, 而北西段的余震活动呈现丛集的特征。 两段的地震序列类型也表现出明显的差异性, 南东段地震序列为主—余型, 序列衰减速度较快; 北西段地震序列为震群型, 序列初期衰减非常缓慢, 余震丰富。 此次6.0级地震序列发生在长宁—双河大背斜上, 该复式背斜主要由多个次级褶皱构造和不同走向的伴生断层组成, 结构复杂。 长宁6.0级地震序列的分段性特征表明, 该地震序列不是发生在单一的断裂构造上, 为多个构造级联破裂所导致的复合型地震序列。 此外, 序列北西段余震的深度逐渐变深, 可能预示着该区域受华蓥山断裂带活动的影响, 地震序列对华蓥山断裂带未来地震活动的影响应引起关注。  相似文献   

Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China     

MA Haiping  WANG Qian  ZHANG Bo  WU Shanyi  WANG Pengtao  DOU Xiying  LI Minjuan 《中国地震研究》2020,34(2):210-218

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

强震下混凝土剪力墙受弯模拟及测试实验研究          下载免费PDF全文

戴勤友  张正瑞 《地震工程学报》2020,42(2):337-344

为提高混凝土剪力墙受弯性能计算的准确度,开展强震下混凝土剪力墙受弯性能试验研究。选取1个混凝土剪力墙对比试件和3个测试试件作为研究对象,对试件施加垂直荷载和水平荷载,模拟强烈地震作用力。试验前期准备工作完成后,建立分离式有限元模型,通过计算混凝土在受压和受拉状态下的损伤弹塑性刚度,完成对有限元模型中混凝土塑性损伤分析,在此基础上,计算混凝土剪力墙受弯承载力。利用有限元模型对3个测试试件进行模拟试验,结果表明,强烈地震后3个试件的荷载-位移曲线均与实际位移值接近,且混凝土剪力墙受弯承载力试验结果与实际值的误差在2%以内,表明试验研究方法具有一定的可行性,数值模拟结果较为准确。  相似文献   

2016年新疆呼图壁6.2级地震前b值异常特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

刘子璇  冯建刚  王维桐 《地震工程学报》2020,42(1):150-156

利用2009年以来中国地震台网中心地震编目资料,以2016年新疆呼图壁6.2级地震作为研究对象,采用最大似然法进行b值空间扫描计算,获取震前震中及其邻区地震b值的空间图像。研究结果显示,2016年呼图壁6.2级地震发生在震前显著低b值区域,该异常特征可能反映了地震孕育的应力积累过程,印证了b值的物理意义。  相似文献   

基于企业微信的宁波市地震应急工作助手的设计与实现     

张蓓蕾  彭骁  董君磊  李杲  周浩波 《地震地磁观测与研究》2020,41(4):251-263

通过分析市县地震部门的地震应急组织机构、主要职能、关键流程，设计了地震应急工作助手的需求方案。并应用ASP.NET MVC、HTML5等开发技术，基于企业微信，开发了包括震情服务、灾情服务、应急服务、工作报告、资料查询、通知公告、通信录等7大功能的地震应急工作助手软件。该软件具有相对机动灵活、成本低、易于推广使用的优势。多次地震应急演练使用表明，软件能在较大程度上提高地震应急工作的规范化程度和处置效率。  相似文献   

结构震后残余位移研究进展          下载免费PDF全文

刘巴黎  胡进军 《世界地震工程》2020,(3):131-140

结构在强震作用下进入非线性阶段会产生不可恢复的永久位移或残余变形，结构残余位移是震后结构抗震性能和地震损失评估的重要参数，具有重要的理论意义和工程实用价值。为了深入分析残余位移的研究现状，为面向性态抗震设计和抗震韧性评估的地震动强度指标研究提供参考，全面和系统分析了国内外结构残余位移相关文献，介绍了残余位移的定义，重点论述了影响结构残余位移的主要因素，总结归纳了残余位移计算模型、残余位移控制方法及考虑残余位移的抗震性能评估方法，最后讨论了残余位移研究中存在的问题和建议。  相似文献   

SOURCE PARAMETERS OF THE CANGWU M_S5.4 EARTHQUAKE, 31 JULY, 2016          下载免费PDF全文

ZHOU Yi  YAN Chun-heng  XIANG Wei  ZHOU Bin  WEN Xiang 《地震地质》2019,41(1):150-161

On July 31^st, 2016, an earthquake of M_S5.4 occurred in Cangwu County, Guangxi Zhuang Autonomous Region, which is the first M_S ≥ 5.0 earthquake in coastal areas of southern China in the past 17a. The moderate earthquake activities have come into a comparatively quiet period in coastal areas of southern China for decades, so the study about the Cangwu M_S5.4 earthquake is very important. However, differernt research institutions and scholars have got different results for the focal depth of the Cangwu M_S5.4 earthquake. For this reason, we further measured the focal depth by using CAP method and sPL phase method. sPL phase was first put forward by Chong in 2010. It is often observed between P and S wave of continental earthquakes with epicentral distance of about 30km to 50km. The energy of sPL phase is mainly concentrated on the radial component. Arrival time difference between sPL phase and direct P wave is insensitive to epicentral distancs, but increases almost linearly with the increase of focal depth. Based on these characteristics and advantages, sPL phase method is chosen to measure the focal depth of Cangwu M_S5.4 earthquake in the paper. First of all, we selected the broadband waveform data through seismic stations distributed mainly in Guangxi and adjacent provinces from Data Management Centre of China National Seismic Network and Guangxi Earthquake Networks Center. And an appropriate velocity model of Cangwu area was constructed by the teleseismic receiver function method. Then, the focal mechanism and focal depth of Cangwu M_S5.4 earthquake were determined by using the CAP(Cut and Paste)method. Next, we compared the synthetic waveforms simulated by F-K forward method of different focal depth models with the actual observed waveforms. According to the difference of arrival times between sPL and Pg phases, we finally obtained the focal depth of Cangwu earthquake. The results show that the focal depth is 11km measured by CAP method and 9km by sPL phase method. Based on the focal mechanism solution, isoseismal shapes, aftershocks distributions and investigation on spot, we conclude that the Cangwu M_S5.4 earthquake is a left-lateral strike-slip earthquake which occurred in the upper crust. Our preliminary analysis considers that the seismogenic structure of Cangwu earthquake is a north-northwest branch fault, and the control fault of this earthquake is the Hejie-Xiaying Fault.  相似文献   

RELOCATION OF THE 23 NOVEMBER 2017 WULONG M_S5.0 EARTHQUAKE SEQUENCE AND ANALYSIS OF ITS SEISMOGENIC FAULT          下载免费PDF全文

LI Cui-ping  TANG Mao-yun  GUO Wei-ying  HUANG Shi-yuan  WANG Xiao-long  GAO Jian 《地震地质》2019,41(3):603-618

The Wulong M_S5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the M_S5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong M_S5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong M_S5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.  相似文献   

STUDY ON FOCAL DEPTH OF THE M_S5.4 CANGWU EARTHQUAKE IN GUANGXI          下载免费PDF全文

ZHAO Tao  CHU Ri-sheng  NI Si-dao  WANG Ying  ZHOU Yong  ZENG Xiang-fang 《地震地质》2019,41(3):619-632

On July 31th, 2016, a magnitude 5.4 earthquake struck Cangwu Country, Guangxi Zhuang Autonomous Region, it was the largest earthquake recorded by Guangxi Seismological Network since it set up. The number of people affected by the earthquake had reached 20 000, and the direct economic losses caused by the earthquake were nearly 100 million Yuan. After the earthquake, USGS provided a global earthquake catalog showing that the focal depth of Cangwu earthquake was about 24.5km. However, the result given by the Global Centroid Moment Tensor showed the focal depth of this earthquake was 15.6km. However, the result obtained by Xu Xiaofeng et al. using CAP method was 5.1km. It was clear that the focal depths of Cangwu earthquake given by different institutions were quite different from each other. However, accurate focal depth of the earthquake has important significance for exploring the tectonic mechanism near the epicenter, so it is necessary to further determine the more accurate depth of the Cangwu earthquake. In order to further accurately determine the focal depth of Cangwu earthquake, we used the global search method for travel-time residual to calculate the focal depth of this earthquake and its error range, based on the regional velocity model, which is a one-dimensional velocity model of the Xianggui tectonic belt produced by the comprehensive geophysical profile. Then, we inverted the focal mechanism of this earthquake with the CAP method. Based on this, the focal depth of Cangwu M_S5.4 earthquake was further determined by the method of the Rayleigh surface wave amplitude spectrum and the sPL phase, respectively. Computed results reveal that the focal depth of this earthquake and its error range from the travel-time residual global search method is about(13±3)km, the focal depth inverted by CAP method is about 10km, the focal depth from sPL phase is about 10km, and the focal depth from Rayleigh surface wave amplitude spectrum is about 9~10km. Finally, we confirmed that the focal depth of Cangwu M_S5.4 earthquake is about 10km, which indicates that this earthquake still occurred in the upper crust. In the case of low network density, the sPL phase and Rayleigh wave amplitude spectrum recorded by only 1 or 2 broadband stations could be used to obtain more accurate focal depth. The focal depth's accuracy of Cangwu M_S5.4 earthquake in the USGS global earthquake catalog has yet to be improved. In the future, we should consider the error of the source parameters when using the USGS global earthquake catalog for other related research.  相似文献   

VARIATION OF THE TRAVEL TIME DIFFERENCE BETWEEN TELESEISMIC PS CONVERTED WAVE AND PP TRANSMITTED WAVE IN FOCAL REGION BEFORE AND AFTER WENCHUAN M_S8.0 EARTHQUAKE          下载免费PDF全文

SONG Chun-yan  SHAO Xue-zhong  MA Jin 《地震地质》2019,41(3):726-742

When P waves from distant earthquakes meet a velocity discontinuity in the earth's crust and upper mantle, they give rise to a series of converted PS waves besides PP refracted waves. It is possible to monitor the variation of the physical properties of the medium in the limited formation space above the transition zone of the seismogenic zone by measuring the time difference between the teleseismic PS converted wave and the first arrival P wave, that is, time-variation Δt_PS=t_PS-t_P. The advantage of this method is that the transition point of the teleseismic source with similar source is relatively stable at the transition interface, and the accuracy of the measured relative time is high, and the change of the medium in a small range of the seismogenic zone above the conversion interface can be monitored. This paper studies the variation of the travel time difference Δt_PS in focal region before and after Wenchuan M_S8.0 earthquake. We select 2001 to 2012 as the research period, use teleseismic waveforms which occurred in the southern region of Sumatra and Hindu Kush area recorded by Sichuan station YZP and JJS. These teleseisms satisfy 5.0 ≤ M ≤ 6.5, and their waveform signal-to-noise ratio is high with clear initial P-wave motion. The epicentral distance of teleseisms is less than 3 degrees. Then we obtain the variation of the travel time difference Δt_PS between teleseismic PS converted wave and PP transmitted wave recorded during the study period in the two stations. The results show that there is a slow increasing trend of Δt_PS before 2006, and an obvious low value process of Δt_PS appeared in the period about 2 years before the Wenchuan earthquake. The maximum decline was about 0.2~0.3s, more than 4~5 times the measurement error. The low value has a certain degree of return about 2~3 months before the earthquake. The change of arrival time difference indicates that the medium is in different states in different periods of seismogenic process. The sharp decrease in Δt_PS from 2006 to January 2008 may be due to the strong disturbance caused by the stress accumulation of the medium. At this stage, the velocity of P wave and S wave increases with the increase of stress, and the increase of S wave velocity will result in the decrease of Δt_PS. The change of Δt_PS is greatly affected by S wave velocity, so Δt_PS appears to decrease rapidly. Regarding the low value that has a certain degree of return about 2~3 months before the Wenchuan earthquake, the possible reason is that the release of stress is much higher than the accumulation of stress in meta-instability stage. At this stage, the velocity of S wave decreases and the decrease of S wave causes Δt_PS to increase. Then, the Wenchuan earthquake of magnitude 8.0 occurred. It is shown that the teleseismic converted wave method in this paper can monitor the variation of medium's wave velocity before large earthquakes, and it has a good prospect in seismic monitoring and worth further experimental study.  相似文献